How to String a Tennis Racket is one of the most important skills they can have. They can use this knowledge during matches to determine how much we need to tighten the string. By saving time and money, it will be very beneficial for you. Unstrung tennis rackets will be more durable and will help you control the tennis equipment better.
How much you can play with a racket it’s doesn’t matter, the only matter how much you do to restring your tennis racket.
- You break your tennis string more times within one month When you play with your tennis racket.
- In case you play occasionally with your tennis racket, make sure you change your tennis string within 6 months if you don’t want to damage your racket frame.
Two different methods are described in our full guide on how to string your tennis racket.
Where to string tennis racket:


If you are looking for tennis racket string replacement services and new racket frames, then there are many websites where you can do so. If you wish to restring your tennis rackets yourself, I recommend that you do so. In order to play tennis successfully, you should have all the equipment you need, including the string for your tennis racket.
Here are the things you’ll need:
There are a few pieces of equipment that help complete the process of unstringing a tennis racket on your own.
- Stringing machine
- Tightening knots with pliers
- Handled metal spikes (awls)
- Ankle clippers
We will guide you through the steps of stringing a tennis racket and putting racket string on the machine. There are several clubs that use these methods, but we will not focus on the clubs in our guide.
Racquet preparation:



Here are the best steps to prepare your racket for the string machine. Ist we need the slippers to cut the string properly, secondly, we need the awl and all of the things needed to prepare the racket.
Choose a standard stringing machine:


Many clubs of tennis rackets and shops have string mounts to restring rackets at low prices. If you talking about the tennis string machines the quality machines will come in under $200.
- With the Gamma X-2, you’ll get the best mount option and great tension to restring the tennis racket if you use rackets a lot.
- If you play tennis rackets a few times a year, then buying a tennis string machine is a great waste of money. To string your tennis racket, I recommend you go to a tennis shop, an online store, or a string service. Tennis racket strings cost between 20 and 30 dollars.
Take the string and measure it out:


To spool the string in the tennis racket, cut the 34 to 40 feets strings to use for.
- First, you need 37 feet for the under 100 square inches racket which is especially for pro players. So use 39 feet to finish the job.
- Secondly for the oversized head racket use 39 to 43 feet which is best figure to completye te string racket job.
My recommendation is to cut as much as you can, for example, 46 feet, so there is no teasing during stringing.
After you’ve strung your racquet, trim the string to the right size. Don’t start with too much.
Getting your racquet ready for stringing:
As soon as possible, cut the old and broken strings with a knife. You may be able to use old string, but it will be detrimental to your racket frame. The middle strings are cut outside the frame beginning with the middle strings.
If new grommets are needed, place them and install them; otherwise, cut the method.
Mount the racquet:


The mounting method is very different and they totally depend upon your tennis machine. Your tennis machine determines the mounting method.
Point mounting systems evenly distribute the weight and tension of the racket. One of the most significant things we take into consideration is the safety of the racket’s clubs. They must be firmly attached to the racket. In this method, you can restring the racket very easily.
Techniques for Restringing: How to string a tennis racket


Ist thing to consider is the string of your tennis racket whether you need one piece or both pieces to mains and crosses. The technique shouldn’t matter since the results shouldn’t be affected in the right situation.
Choose between one- and two-piece stringing:


A racket can easily be strung vertically or horizontally with only one or two pieces of string, which is the most effective method. In the past, I have used one piece of string, but they interfere with the racket frame. However, recently we have switched to one piece and then we use two pieces of string.
Head to the throat is the recommended method of strangling. Start at the top because of the tension of the strings. One-string racquets can’t be strung.
Take hold of the main strings:
Pull the main string which runs to the same side of the racket. Now put the string on the holes of the racket head. From the head, wrap it around the neck.
- At the next stage, you place the string on the grip and turn the racket into the horizontal position. You can easily repeat the same steps for the vertical position. Using the machine rod, tighten the string.
- A second clamp is needed for the second string. Twisting the holes, tucking one in and letting go of the last.
Put a knot in the main strings:



Secure the string ends with needle-nose pliers and the awl. Firmly knot the short end. Cut the string.
Crosses should be strung:
The crossing pattern begins after the last main row. Parallel strings on long axis racquets. One grommet is usually used to indicate where to put the string. Strings must be tensioned equally.
- Tie the crossing strung to the main strung through the big grommet on the rim.
- Cross the strings gently. Wear the main strings first.
Cross the strings and knot them:


With the help of grommets cross the back strings and thread them. After finishing, this step ties it with the main string and Secures the string ends with needle-nose pliers and the awl. Leave the stress of the string and cut the extra string. At the last out the racket from the string machine.